Hard Surface Cleaning & Sealing in San Diego, CA

Professional cleaning every 12 months prevents the buildup that makes a surface hard to recover, and concrete should be resealed every 1 to 3 years. Surfaces in full sun, with heavy foot traffic, or close to the water need the shorter end of both ranges.

Yes, on any surface you want to keep looking clean. All three are porous and absorb spills, oils, and moisture into the material. A sealant creates a barrier that prevents staining and keeps grout cleaner longer, and a sealed surface takes far less work to maintain between visits.

pH-neutral solutions matched to the material, plus cleaners with chelating agents where salt buildup is the issue. Harsh acidic products etch natural stone permanently. One safety note for anyone cleaning at home: never mix cleaning chemicals, particularly acids and bleach — the reaction produces toxic gas.

For routine upkeep, yes. Regular mopping or rinsing with fresh water reduces salt buildup on outdoor surfaces, and vinegar and baking soda handle light marks on sealed concrete. Vinegar should stay off natural stone, since the acid etches it. Set-in stains, grout restoration, and anything below the surface need professional equipment.

Most residential patios, walkways, and pool decks are cleaned in a few hours. Sealing follows once the surface has dried fully, so allow a day overall. Timelines vary depending on surface area, material, and how deep the staining runs.

Usually. Professional cleaning restores most hard surfaces to like-new condition, and grout cleaning in particular brings back the original color that most homeowners assume is gone for good. Stone that stays dull needs polishing instead. For concrete with set-in stains, our concrete stain removal service handles it before sealing.